Home :: Morris Commercials :: Morris LD :: Brake & Hydraulic

Brake & Hydraulic

Brake & Hydraulic
Brake & Hydraulic Parts For the LD was designed and released in 1952 by Morris and Austin now BMC, it was to be the replacement for the now very dated Morris Commercial PV 1 ton van & the Austin K8 (2.2 litre petrol ohc 4 cylinder).
The earliest models were the LD or LD1 and later a 1.5 ton LD2 after about 3243 chassis were made (about January 1955) the front treatment was modified to the broad grill and recessed headlights. The Morris Commercial badge was now gone forever from this model and now either had 'Morris' or 'Austin' above the grille.
Brad Dunn Vintage truck Supplies 2021Ambulances etc. The LD was manufactured up until the release of its replacement the EA van (Easy Access).
Today a good amount survive and many are being restored.
 

Products

Flexible Brake Hose Suit Morris Commercial LC, LD models

Product code: BDVTS17772
Flexible Brake Hose Suit Morris Commercial LC, LD Fits both sides front and rear to axle.
$62.00
save 17%
including GST 10.00 %

Brake Bleeder Nipple/ Screw Front and Rear Morris Commercials from 1955 on with Girling Brakes

Product code: BDVTS17738
Morris Commercial, Front & Rear Wheel Cylinder BLEEDER NIPPLE/ SCREW to suit - LC5 & LC05 trucks (from chassis #38717), LD1 & LD2 Vans (from Chassis#16121) LD4, LD5, LDM20, LDM30, 360LD.
$18.00
including GST 10.00 %

Brake Bleeder Nipple/ Screw Front and Rear Morris Commercials to 1955

Product code: BDVTS17737
Morris Commercial, Front & Rear Wheel Cylinder BLEEDER NIPPLE/ SCREW to suit PV (from Chassis # 3679 on ), LC, LC3 & LC4 all, and LC5 & LC05 (up to chassis #38716), LD1 & LD2 Vans (up to Chassis#16120)
$18.00
including GST 10.00 %

Brake Master Cylinder Kit - Morris Commercial LD Van

Product code: BDVTS17765
Here we have a Brake Master Cylinder Kit, fits Lockheed system in Morris Commercial LD 1 TON & 30Cwt Vans from 1954 ON.
$88.00
including GST 10.00 %

Front Wheel Cylinder Set of Four Suit Morris Commercial & Austin LD Vans 1955-59.

Product code: BDVTS17969
Front Wheel Cylinder **Set of Four 2 LH + 2 RH** Suit Morris Commercial LD1, LD2 1955 to 1959 & LD4. 25/30 Cwt.
$596.00
including GST 10.00 %

Pedal Pad Covers, Rubber Morris Commercial LC LC3 LC4 LC5 CV NCV ECV NV PV LD Van & Austin 301 & LD Van

Product code: BDVTS17721
Price is for ONE ONLY, there are two required for each truck. Rubber Molded to suit Morris Commercials- LC trucks, LD vans, Also some Austin 301 Trucks 1956 to 59.
$29.00
including GST 10.00 %

Rear Wheel Cylinder Kit, Suits Morris Commercials. Does both Sides.

Product code: BDVTS17752
Rear Wheel Cylinder Kit, Suits Morris Commercials. Kit does both Sides. Contains Seals and Dust Covers. 1955 on.
$92.00
including GST 10.00 %

Wheel Cylinder Gaiter Rear, Handbrake Lever cover LC, PV Van, & Early LD Van

Product code: BDVTS17742
Wheel Cylinder Gaiter Rear, Handbrake Lever cover, DUST BOOT/ GAITER to suit Morris Commercial LC, PV Van, & Early LD Van.
$31.00
including GST 10.00 %

Wheel Cylinder Rear with handbrake arm and piston Morris Commercial LC3, PV, LD, LC5 until 1955

Product code: BDVTS17736
Morris Commercial, Rear Wheel Cylinder Assembly to suit PV (from Chassis # 3679 on ), LC, LC3 & LC4 all, and LC5 & LC05(up to chassis #38716), LD1 & LD2 Vans (up to Chassis#16120) NOTE- You need x 1 per rear wheel, if you want a pair- change the quantity to x2 at checkout.
$259.00
including GST 10.00 %

Wheel Cylinder Seal Kit Rear Morris Commercials LC3, LC4, LC5 Early, LD Van & PV 1948-53

Product code: BDVTS18091
Morris Commercial, Rear Wheel Cylinder kit to suit PV (from Chassis # 3679 on ), LC, LC3 & LC4 all, and LC5 & LC05(up to chassis #38716), LD1 & LD2 Vans (up to Chassis #16120)
$44.00
save 4%
including GST 10.00 %

Wheel Cylinders Front- Complete Set of 4- suit Austin & Morris LD 1 & 1.5 ton Van 1955- 1959

Product code: BDVTS17819
Wheel Cylinder Set of 4, Front Austin & Morris LD 1 and 1.5 ton Vans
$598.00
including GST 10.00 %