- per page
Flexible Hydraulic Brake Hose- Suits International, K, KB, AA, AB & Acco, C, line, D Line, Series. Most of the Heavier series.
Product code: BDVTS18302
Brake hose to suit International K & KB, L,R & S, AA, AB, C line, D Line. See Below for exact Fitment. Most the heavier models
$62.00
save 17%
including GST
10.00
%
12 Volt Ignition Coil Screw in High Tension Lead Type with Silver Body. Original Classic Function & Style. 1935-65
Product code: BDVTS18297
If Having Your Vehicle looking very Original is very important, then this 12 Volt Coil is the what You Require- as it has the correct screw in Coil Lead Olive Fitted. Beautifully made to compliment your Classic Truck or Car.
$92.00
save 15%
including GST
10.00
%
Brake Master Cylinder Kit, International, Trucks, Dodge AT4- 500/600 Series, D5N, 4,5, 6, TON, Thames LD, Mack, Fargo, Federal, Thornton, G.M.C., Indiana, Reo, Stewart, Studebaker, White
Product code: BDVTS18133
A Master Cylinder Kit Service Kit less Piston containing all the seals and valve to get you Stopping Again See Below For Which Exact Models it fits.
$88.00
including GST
10.00
%
Coil Lead Boot Staight Rubber Gaiter
Product code: BDVTS17904
A quality Non resisted Straight Ignition Coil Gaiter/ Cap. Suits Petrol Engined models with 6 & 12 volt Coils with push in terminals.
$5.00
including GST
10.00
%
Contact Points Set Suit International Truck, Chevrolet & G.M.C Trucks & Cars- Buick, Holden, Hudson, Nash, Oldsmobile, Pontiac, Rambler & Studebaker.
Product code: BDVTS18109
Fix your rough running engine with New adjustable Points set for the V8 International Trucks along with G.M.C & Chevrolet V8 trucks. These are made to OEM quality. See below & Check Photos for proper fitment.
$59.00
including GST
10.00
%
Ignition Coil 12 Volt (Non-Ballasted) to suit Many Cars incl. Morris 1948 Onwards with 12 volt system
Product code: BDVTS17814
Ignition Coil 12 Volt (Non-Ballasted) to suit Morris Cars 1948 onwards Dodge Truck & International Trucks with 12 Volt System
$68.00
including GST
10.00
%
International Truck Front Side Light Park Lens Suit AL, AR & R Series Trucks 1949-58
Product code: BDVTS18233
One New Aussie Made Parking Light Lens to suit International Trucks Including AL, AR & R Series with this distinctive Rectangular Style. CLICK to read the dimensions and the models this Great Lens should fit
$39.00
save 13%
including GST
10.00
%
Oil Filter Cartridge International Trucks (Bypass Type) B C D Series, K KB L AL AR AS AA, USA Made Genuine Quality.
Product code: BDVTS18226
Oil Filter Cartridge to suit Some Trucks Listed Here. There were TWO types fitted Back in the day, this one goes in a canister that points skyward- Your Filter Brand then is MICHIANA No.- SA151117 (The other type hangs down & is VOKES brand). This Filter Replaces OEM # 850720R92. I have Dimensions listed In the details If You Click to see the Details.
$95.00
save 14%
including GST
10.00
%
Oil Pump Repair Kit For International Trucks with 6 Cylinder- ABD, AGD 240, 264, 281, 282 Tilt Valve 1958-78 6 Cylinder. Petrol.
Product code: BDVTS18298
This Melling Oil Pump Repair Kit is a stock replacement rebuild kit manufactured in the USA, specifically designed for vintage International Harvester engines and vehicles.
$285.00
save 11%
including GST
10.00
%
Rear Wheel Cylinder Kit 1-5/8" Bore- Dodge AT4 & D5N 6 & 7 & USA 500, 600, 700 & 800 Series, International AB AS, C D R & V Line Fleetstar, ACCO & USA Models
Product code: BDVTS18180
Rear Wheel Cylinder Kit suit 6 & 7 ton Dodge AT4 & D5N with 1-5/8" Bore & USA 500 to 800 Series. Also INTERNATIONAL Trucks AB AS, C & D Line, Loadstar, Fleetstar, ACCO. Two kits are required per wheel. See below for exact models these fit.
$47.00
including GST
10.00
%
Tie Rod Ends PAIR L.H & R.H, Commer, Dennis, Federal, Inter., Karrier, De Soto, Dodge & Fargo.
Product code: BDVTS17963
These Are New Old Stock, Never used.
Price is for a matched pair- 1 x R.H. & 1 X L.H. Some vehicles have two sets- 2 as Tie rod ends & 2 for Drag link ends. For these you'll need to buy two sets.
Please Refer to the Detailed Description to see exactly what these fit.
Price is for a matched pair- 1 x R.H. & 1 X L.H. Some vehicles have two sets- 2 as Tie rod ends & 2 for Drag link ends. For these you'll need to buy two sets.
Please Refer to the Detailed Description to see exactly what these fit.
$285.00
including GST
10.00
%
Tie Rod Track Rod End Ball joint Rubber Boot Gaiter Cover Seals around base Suits Many Makes & Models.
Product code: BDVTS18254
If your Tie Rod Ends or Ball joints need new Rubber Dust Boots then These 'may' be a good replacement for your affected ones, NOTE this is a suggestion that it 'MAY' fit your Truck/ Tractor. Sizes are written Below Please check that these will cover the Ball and grease on yours.
$15.00
including GST
10.00
%
- per page
