- per page
Brake Hose Flexible Front- Suit Morris Commercial LC-25cwt & T model 3 ton - 1938 & 1939. MG, Wolseley and Morris 1932-40
Product code: BDVTS17840
Brake Hose Flexible, Front fits both sides - Suit Morris Commercial LC-25cwt and T model 3 ton - 1938 & 1939 MG, Wolseley and Morris 1932-42
$62.00
save 17%
including GST
10.00
%
Flexible Brake Hose Suit Morris Commercial LC, LD models
Product code: BDVTS17772
Flexible Brake Hose Suit Morris Commercial LC, LD Fits both sides front and rear to axle.
$62.00
save 17%
including GST
10.00
%
Brake Bleeder Nipple/ Screw Front and Rear Morris Commercials to 1955
Product code: BDVTS17737
Morris Commercial, Front & Rear Wheel Cylinder BLEEDER NIPPLE/ SCREW to suit PV (from Chassis # 3679 on ), LC, LC3 & LC4 all, and LC5 & LC05 (up to chassis #38716), LD1 & LD2 Vans (up to Chassis#16120)
$18.00
including GST
10.00
%
Brake Drum adjuster Screw in Plug (1) suit LC25cwt LC30CWT LC3, LCS With 20" Wheels some with 16" Wheels
Product code: BDVTS18060
Here we have an Australian made perfect reproduction of LC3 Brake Drum Adjuster Bung Plug- PRICE IS EACH. They screw into your Drums outer face to keep water & dirt out of your drums. Many lazy Mechanics over the years tossed them to speed up the brake adjustment process, it was not a good practice. Made from quality Brass to a very close tolerance.
$39.00
including GST
10.00
%
Brake Light Switch Push on spade terminals Morris Commercial, Austin, MG TD/TF
Product code: BDVTS18053
Brake Light Switch with spade Terminals for British Cars & Trucks.
$36.00
including GST
10.00
%
Brake Master Cylinder Kit - Morris Commercials LC3, LC4, LC5.
Product code: BDVTS17763
Here we have a Brake Master Cylinder Kit, fits Lockheed system in Morris Commercial LC trucks from 1948 until 1955 -
$88.00
including GST
10.00
%
Front Wheel Cylinder Seals kit both wheels. Suit Morris Commercial LC3 LC4 & LC5 to 1954, PV Van 1948-on.
Product code: BDVTS18087
Front Wheel Cylinder Seals Kit (Repairs brakes on both sides of your vehicle) Suit Morris Commercial LC3 LC4 & LC5 to 1955. LD1, LD2, LDM20, LD4 & PV Vans. Fits all these LCs up to mid 1955 before Girling Brakes were fitted with the separate Brake Fluid Reservoir.
$49.00
including GST
10.00
%
Front Wheel Cylinder Set of Four Suit Morris Commercial LC3 LC4 & LC5 to 1954, PV Van all.
Product code: BDVTS17968
Front Wheel Cylinder **Set of Four** Suit Morris Commercial LC3 LC4 & LC5 to 1954. 25/30 Cwt & PV Vans. All these LCs up to mid 1955 before Girling Brakes were fitted with the separate Brake Fluid Reservoir.
$596.00
including GST
10.00
%
Morris Commercial LC3 & LC3U Master Cylinder. Complete Assembly
Product code: BDVTS17775
Morris Commercial Master Cylinder. suits LC3, LC3U, 20-25 Cwt. TRUCK, UTILITY, Van, Complete Assembly
$394.00
including GST
10.00
%
Pedal Pad Covers, Rubber Morris Commercial LC LC3 LC4 LC5 CV NCV ECV NV PV LD Van & Austin 301 & LD Van
Product code: BDVTS17721
Price is for ONE ONLY, there are two required for each truck. Rubber Molded to suit Morris Commercials- LC trucks, LD vans, Also some Austin 301 Trucks 1956 to 59.
$29.00
including GST
10.00
%
Wheel Cylinder Gaiter Rear, Handbrake Lever cover LC, PV Van, & Early LD Van
Product code: BDVTS17742
Wheel Cylinder Gaiter Rear, Handbrake Lever cover, DUST BOOT/ GAITER to suit Morris Commercial LC, PV Van, & Early LD Van.
$31.00
including GST
10.00
%
Wheel Cylinder Rear with handbrake arm and piston Morris Commercial LC3, PV, LD, LC5 until 1955
Product code: BDVTS17736
Morris Commercial, Rear Wheel Cylinder Assembly to suit PV (from Chassis # 3679 on ), LC, LC3 & LC4 all, and LC5 & LC05(up to chassis #38716), LD1 & LD2 Vans (up to Chassis#16120) NOTE- You need x 1 per rear wheel, if you want a pair- change the quantity to x2 at checkout.
$259.00
including GST
10.00
%
- per page
