Home :: Austin BMC Leyland :: 301 30cwt :: Electrical

Electrical

Electrical
Electrical parts to Suit the Austin 301 Truck
The Austin 301 is a badge engineered BMC vehicle which was mostly sold under the Morris Commercial Badge. For three years they were sold as an Austin through 1957, 1958, & 1959. The helped fill a gap in the 1.5 ton 30cwt range in trucks at that time. Quite often there is fitted an extra piece of grille down the centre of the grille and the Flying A badge often adorns the top of the grille shell, some times the Pedal pads are Austin Tomb stone ones and other times ive seen round Morris style ones.
 

Products

12 Volt Ignition Coil Screw in High Tension Lead Type with Silver Body. Original Classic Function & Style. 1935-65

Product code: BDVTS18297
If Having Your Vehicle looking very Original is very important, then this 12 Volt Coil is the what You Require- as it has the correct screw in Coil Lead Olive Fitted. Beautifully made to compliment your Classic Truck or Car.
$92.00
save 15%
including GST 10.00 %

Brake Light Switch Push on spade terminals Morris Commercial, Austin, MG TD/TF

Product code: BDVTS18053
Brake Light Switch with spade Terminals for British Cars & Trucks.
$36.00
including GST 10.00 %

Brush Set Lucas Dynamo Generator British Cars, Trucks & Tractors

Product code: BDVTS17960
A new set of Carbon Dynamo/ Generator Brushes to suit the various model cars, Truck and Tractors listed below in the 'Detailed Description' below. please check the pictures and listing to confirm these are what's fitted to your vehicle.
$39.00
including GST 10.00 %
Out of stock
Click here to subscribe for 'Back-in-stock' notifications

Chassis Clips- Wiring, Made from Plated Spring steel. 66mm Long

Product code: BDVTS17878
These 66mm Long- R style chassis clips are great replacements for the originals that by now may be lost or gone a bit rusty and weak. Price is for 1 so adjust the units required at checkout.
$5.00
including GST 10.00 %

Coil Lead Boot Angled Rubber Gaiter

Product code: BDVTS17903
A quality Angled Non resisted Ignition Coil Gaiter/ Cap. Suits Petrol Engined models with 6 & 12 volt Coils with push in terminals.
$6.90
including GST 10.00 %

Coil Lead Boot Staight Rubber Gaiter

Product code: BDVTS17904
A quality Non resisted Straight Ignition Coil Gaiter/ Cap. Suits Petrol Engined models with 6 & 12 volt Coils with push in terminals.
$5.00
including GST 10.00 %

Contact Points One Piece Suit Petrol Vehicles 1956 on

Product code: BDVTS17905
Contact points to suit a huge amount of vehicle makes and Models, these are a one piece design. Please see 'Detailed Description for proper Fitment.
$29.00
including GST 10.00 %

Distributor Cap Rubber Boot Straight Suit 7mm Leads.

Product code: BDVTS17916
Rubber Boots for the Distributor Cap, They fit over each lead receptacle on push In lead caps and will also go on over Acorn style distributor caps too. Will keep water out and save break downs.
$5.00
including GST 10.00 %

Distributor Cap suit Austin Commercials with 2.2 ltr Petrol 1955 to 1974 **This Cap Is For Push In Leads Only**.

Product code: BDVTS17824
Distributor Cap suit Austins with 2.2 ltr Petrol 1954 to 1974. Most LD Vans & 301, FG K30, & WFK30 **This Cap Is For Push In leads**
$66.00
including GST 10.00 %

Headlight Wiring Harness Pre Focus type headlights, with Bullet Connectors

Product code: BDVTS17915
A replacement Headlight Wiring harness, used in Cars, Trucks and Vans with Pre-Focus Headlights. Fitted with original bulb holder and bullet connectors.
$42.00
including GST 10.00 %

Ignition Coil 12 Volt (Non-Ballasted) to suit Austin 4 & 6 cylinder Petrol- 1939 onwards

Product code: BDVTS17811
Ignition Coil 12 Volt Non-Ballasted to suit Austin 4 & 6 cylinder Petrol Trucks and Cars 1939-1975.
$68.00
including GST 10.00 %

Ignition Condenser Suit Austin Trucks, Utes & Vans 1954- 1974

Product code: BDVTS17851
Ignition Condenser New to Suit Austin Trucks, Utes & Vans 1954-74 4& 6 Cylinder. **Please see below in DETAILED DESCRIPTION for proper fitment**
$29.00
including GST 10.00 %