- per page
Bifurcated Rivet Split 15mm x 3.2mm (10 pack) Trim and seal fitting
Product code: BDVTS17704
Here is a 10 pack of 3.2mm wide by 15mm long Bifurcated/Split Rivets.
$7.00
including GST
10.00
%
Bifurcated Rivet Split 15mm x 3.2mm (10 pack) Trim and seal fitting
Product code: BDVTS17941
Here is a 10 pack of 3.2mm wide by 15mm long Bifurcated/Split Rivets. I've tested these by leaving them out in the weather for months and they didn't rust or dull, so I'm confident they will perform well on your truck.
$7.00
including GST
10.00
%
Bifurcated Rivet Split 15mm x 3.2mm (40 pack) Trim and seal fitting
Product code: BDVTS17750
Here is a 40 pack of 3.2mm wide by 15mm long Bifurcated/Split Rivets.
$18.00
including GST
10.00
%
Bonnet Catch Chrome finish Spring Loaded Hook & Catch Used on Austin Loadstar & 301, Morris Commercial LC5 Or General Purpose on Gull Wing Bonnets.
Product code: BDVTS18300
A great quality replacement Bonnet Hook/ Catch, made of Chromed alloy. These can be used on many vehicles. Note, that the base mounts onto a flat surface. Price Is For One.
$69.00
save 7%
including GST
10.00
%
Bonnet Catch Natural Alloy finish With Spring Loaded Hook and Catch Used on Austin Loadstar & 301, Morris Commercial LC5 Or General Purpose on Gull Wing Bonnets.
Product code: BDVTS18299
A great quality replacement Bonnet Hook/ Catch, made of natural alloy finish (It is not Chrome, if you want chrome finish see link at bottom of page. These can be used on any vehicle. Note that the base mounts onto a flat surface. Price Is For One.
$55.00
save 7%
including GST
10.00
%
Bonnet Lacing - 15mm Black COTTON flat webbing
Product code: BDVTS18293
16mm x 2.8mm- Very Heavy Duty Cotton Bonnet Lacing. Used very often on Trucks and Cars from 1920 to 1960. It provides a buffer between Bonnet and Grille Shell Up Front OR at the Bonnet rear to prevent rubbing on the front edge of your Cowl/ Scuttle. usually held in place with Bifurcated Rivets, sold in 10 or 40 packs see link below.
$15.00
save 12%
including GST
10.00
%
Chassis Clips- Wiring Retainer, Made from Plated Spring steel. 41mm long
Product code: BDVTS18117
These R style chassis clips are great replacements for the originals that by now may be lost or gone a bit rusty and weak.
$5.00
including GST
10.00
%
Chassis Clips- Wiring, Made from Plated Spring steel. 66mm Long
Product code: BDVTS17878
These 66mm Long- R style chassis clips are great replacements for the originals that by now may be lost or gone a bit rusty and weak. Price is for 1 so adjust the units required at checkout.
$5.00
including GST
10.00
%
Chrome Door Handle Exterior Locking, Fits many applications
Product code: BDVTS17914
A 105mm long Door Handle beautifully chromed and locking with two keys. These have an Escutcheon with 36mm hole centres.
$225.00
Coil Lead Boot Staight Rubber Gaiter
Product code: BDVTS17904
A quality Non resisted Straight Ignition Coil Gaiter/ Cap. Suits Petrol Engined models with 6 & 12 volt Coils with push in terminals.
$5.00
including GST
10.00
%
Furry Pile lined Wind Lace in Various Colours Suit Vintage Cars & Trucks
Product code: BDVTS17950
Here we have High quality Furry Pile covered fabric, Interior Coach work- Windlace for around Door ways on Vintage Coachwork. It is available in various colours and sold by the metre.
$39.00
including GST
10.00
%
Gear Shift Boot Suits Rover Cars P3 & P4. But can be used for other suitable Vehicles.
Product code: BDVTS18276
Rubber Gear Shift Gaiter Boot, For Manual Floor Shift. Floor mounted Dust Excluding Boot. Is a perfect replacement for Rover P3 & P4 Cars and Many other applications. See dimensions below.
$45.00
save 8%
including GST
10.00
%
- per page
