Wheel Cylinder Gaiter Rear, Handbrake Lever cover, DUST BOOT/ GAITER to suit Morris Commercial LC, PV Van, & Early LD Van.
**Read Carefully the following**
Morris Commercial, Rear Wheel Cylinder Dust Boot/ Gaiter to suit- PV parcels van (from Chassis # 3679 on ), LC3 & LC4 all, and LC5 & LCO5 trucks (up to chassis #38716), LD1, LD2 Vans to 1955 (up to Chassis#16120).
This is for Lockheed brakes.
If you are unsure of which brakes your LC5 or LD van has fitted look for this- Rear Wheel cylinders should have the bent arm protruding, your metal brake pipes should be 1/4" and your master cylinder should have a reservoir built in not remotely mounted.
Morris Commercial, Rear Wheel Cylinder Dust Boot/ Gaiter to suit- PV parcels van (from Chassis # 3679 on ), LC3 & LC4 all, and LC5 & LCO5 trucks (up to chassis #38716), LD1, LD2 Vans to 1955 (up to Chassis#16120).
This is for Lockheed brakes.
If you are unsure of which brakes your LC5 or LD van has fitted look for this- Rear Wheel cylinders should have the bent arm protruding, your metal brake pipes should be 1/4" and your master cylinder should have a reservoir built in not remotely mounted.
