Morris Commercial, Rear Wheel Cylinder Assembly to suit PV (from Chassis # 3679 on ), LC, LC3 & LC4 all, and LC5 & LC05(up to chassis #38716), LD1 & LD2 Vans (up to Chassis#16120) NOTE- You need x 1 per rear wheel, if you want a pair- change the quantity to x2 at checkout.
**Read Carefully the following**
Morris Commercial, Rear Wheel Cylinder Assembly to suit- PV parcels van (from Chassis # 3679 on ), LC, LC3, LC3U & LC4 all, and LC5 & LCO5 trucks (up to chassis #38716), LD1, LD2 Vans to 1955 (up to Chassis#16120).
This is for Lockheed brakes.
If you are unsure of which brakes your LC5 or LD van has fitted look for this- Rear Wheel cylinders should have the bent arm protruding, your metal brake pipes should be 1/4" and your master cylinder should have a reservoir built in not remotely mounted.
Note they are not supplied with Rubber Gaiters but they are available separately and are listed if you require them
Morris Commercial, Rear Wheel Cylinder Assembly to suit- PV parcels van (from Chassis # 3679 on ), LC, LC3, LC3U & LC4 all, and LC5 & LCO5 trucks (up to chassis #38716), LD1, LD2 Vans to 1955 (up to Chassis#16120).
This is for Lockheed brakes.
If you are unsure of which brakes your LC5 or LD van has fitted look for this- Rear Wheel cylinders should have the bent arm protruding, your metal brake pipes should be 1/4" and your master cylinder should have a reservoir built in not remotely mounted.
Note they are not supplied with Rubber Gaiters but they are available separately and are listed if you require them
