Austin Gipsy

Austin Gipsy
Here you will find parts for the Austin Gipsy.
The Austin Gipsy was a 4 wheel Drive built by Austin to get a slice of the 4wd market in the UK dominated by the Land Rover, They were manufactured to be a cheaper vehicle than the Austin Champ, which was to expensive to compete. The Champ was manufactured between 1958 to 1968 and was powered by the Austin A70 2.2 litre of 62hp
 

Products

Manifold Gasket Suit 2199cc 2.2 litre petrol Austin BMC Morris Commercial LC5 LD Healey 100 Gipsy K8 A90

Product code: BDVTS18161
Manifold Gasket for 2.2 LEA 4 Cylinder BMC Austin 16hp Motor. See below for Fitment-
$65.00
save 6%
including GST 10.00 %

Rear View Mirror Truck & Car Interior with Suction Cup Fits All Vehicles Ideal 2nd Blind spot Mirror

Product code: BDVTS18074
Here's a great Suction Stick-on Rear view Mirror, of decent size this Mirror will add so much more view. You can position them anywhere that suits and they hang on Tight!
$34.00
including GST 10.00 %

12 Volt Ignition Coil Screw in High Tension Lead Type with Silver Body. Original Classic Function & Style. 1935-65

Product code: BDVTS18297
If Having Your Vehicle looking very Original is very important, then this 12 Volt Coil is the what You Require- as it has the correct screw in Coil Lead Olive Fitted. Beautifully made to compliment your Classic Truck or Car.
$92.00
save 15%
including GST 10.00 %

Austin Commercial Mud Flaps Single Wheels.

Product code: BDVTS17962
A PAIR (2) of Heavy Duty flexible solid Plastic/ Rubber Mud Flaps. Quality Australian made, with Raised 3D Lettering & Flying "AUSTIN A" Mascot **See Detailed Description for Size & Fitment**
$96.00
including GST 10.00 %

Bifurcated Rivet Split 15mm x 3.2mm (10 pack) Trim and seal fitting

Product code: BDVTS17704
Here is a 10 pack of 3.2mm wide by 15mm long Bifurcated/Split Rivets.
$7.00
including GST 10.00 %

Bifurcated Rivet Split 15mm x 3.2mm (40 pack) Trim and seal fitting

Product code: BDVTS17750
Here is a 40 pack of 3.2mm wide by 15mm long Bifurcated/Split Rivets.
$18.00
including GST 10.00 %

Brush Set Lucas Dynamo Generator British Cars, Trucks & Tractors

Product code: BDVTS17960
A new set of Carbon Dynamo/ Generator Brushes to suit the various model cars, Truck and Tractors listed below in the 'Detailed Description' below. please check the pictures and listing to confirm these are what's fitted to your vehicle.
$39.00
including GST 10.00 %
Out of stock
Click here to subscribe for 'Back-in-stock' notifications

Brush Set Lucas Dynamo Generator British Cars, Trucks & Tractors. Austin, Bedford & More

Product code: BDVTS17961
Here's a new Carbon Brush set for the Lucas Generator. For proper fitment see Detailed description.
$39.00
including GST 10.00 %

Coil Lead Boot Angled Rubber Gaiter

Product code: BDVTS17903
A quality Angled Non resisted Ignition Coil Gaiter/ Cap. Suits Petrol Engined models with 6 & 12 volt Coils with push in terminals.
$6.90
including GST 10.00 %

Coil Lead Boot Staight Rubber Gaiter

Product code: BDVTS17904
A quality Non resisted Straight Ignition Coil Gaiter/ Cap. Suits Petrol Engined models with 6 & 12 volt Coils with push in terminals.
$5.00
including GST 10.00 %

Contact Points One Piece Suit Petrol Vehicles 1956 on

Product code: BDVTS17905
Contact points to suit a huge amount of vehicle makes and Models, these are a one piece design. Please see 'Detailed Description for proper Fitment.
$29.00
including GST 10.00 %

Distributor Cap Rubber Boot Straight Suit 7mm Leads.

Product code: BDVTS17916
Rubber Boots for the Distributor Cap, They fit over each lead receptacle on push In lead caps and will also go on over Acorn style distributor caps too. Will keep water out and save break downs.
$5.00
including GST 10.00 %