Home :: Morris Commercials :: Morris LC LC3 :: Body & Cab

Body & Cab

Body & Cab
Body & Cab Parts Available Here there are listed all parts for the LC (Light Commercial) commenced production at chassis number 1001 on the 2nd of November 1937.
The LC stopped production during the 2nd world war and resumed production at chassis number 3954 and continued until chassis number 10060.
In August 1948 The upgraded LC3 continued now with a shorter 9' 6" wheel base
There was a run of LC3 Utilities made with a well based tub on the rear it was named the LC3U.
The LC3 stayed until 1952 and ceased at chassis number 28497.
 

Products

Guard/Wing Piping kit, Includes Bifurcated Rivets for Fitting to LC3 & CV Type Morris Commercials

Product code: BDVTS17900
This profile sits between your Wing and the Cab body, it stops metal on metal rubbing & squeaking and the lip nicely fills the gap that is ugly. We've had it reproduced by an Aussie company & is a perfect match of the original. Cut to length for your LC25Cwt, LC3, LC3U & CV Type Morris Commercial,
$44.00

Morris Commercial Quarter Light/ Window Seal x 1 Suit LC 25Cwt, LC3, CV & Variations.

Product code: BDVTS17863
Great Quality and Perfect Fit. Aussie Made here buy a Family owned business. These seals will complete your truck. Check DETAILED DESCRIPTION for correct fitment.
$163.00
including GST 10.00 %

Pedal Pad Covers, Rubber Morris Commercial LC LC3 LC4 LC5 CV NCV ECV NV PV LD Van & Austin 301 & LD Van

Product code: BDVTS17721
Price is for ONE ONLY, there are two required for each truck. Rubber Molded to suit Morris Commercials- LC trucks, LD vans, Also some Austin 301 Trucks 1956 to 59.
$29.00
including GST 10.00 %

Rear Bonnet Lace kit, Includes Bifurcated Rivets for Fitting to LC3 & CV Type Morris Commercials

Product code: BDVTS17899
This profile sits on your cowl where the rear edge of your bonnet sits. We've had it reproduced by an Aussie company & is a perfect match of the original. Cut to length for your LC25Cwt, LC3, LC3U & CV Type Morris Commercial,
$98.00

Rear Wind Screen Seal Suit Morris Commercial CV NV & LC All With Factory Cabs 1938-60 & Austin 301

Product code: BDVTS18017
Windscreen Seal for the rear window fitted in Morris Commercials LC3. LC4, LC5, & the Austin 301. A great fitting quality seal which when fitted correctly keeps the rain and the breeze out where it belongs. Easy to fit it clamps up tight when you do the screws up inside securing your window and protecting it from vibration damage.
$74.00
including GST 10.00 %

Stainless Wiper Blade 10" fixed rubber peg or Hook mount in Slotted Arm. Can be cut to length very easy.

Product code: BDVTS17967
10" (250mm) Fixed Wiper Blade. To fit slotted Wiper Arm. held in place by Rubber Peg or the hook type. Fits Flat windscreen models with slotted Wiper Arm.
$49.00
including GST 10.00 %

Universal Gear Stick Boot For Austin & Morris Trucks

Product code: BDVTS18138
Gear Stick Boot Gaiter. This is a Universal type but definitely suits your model truck if it has popped up under the truck you searched for here. It has a great wide flat flange to secure it to metal or older wooden floors or conceal under the carpet or your rubber floor mat. Dimensions are supplied in the detailed description with a list of known models it fits ( Ones that I checked on actual trucks I have here)
$55.00
including GST 10.00 %

Windscreen Seal Set For Morris Commercial LC- LC3 & CV CVS Varieties For Window Frames

Product code: BDVTS18021
This Windscreen Seal Set Contains very specific Rubbers to mount and install your glass into the metal frames and then mount the frames into the CV CVS Types & LC- LC3 Cabin Orifices. The flat tape is a special super thin non cured rubber for fitting glass into frames and then the T slot rubber slides into the external slot around the frames which then rests against the bodywork to exclude wind and rain.
$248.00
including GST 10.00 %

Wiper Arm and Blade Package, Adjustable length Arm and trimmable Blade. Universal Kit, Suits Many Applications with 6mm or 6.4mm Spindles

Product code: BDVTS18045
Here Is a Wiper Arm & Blade set-up designed to replace many set-ups on many vehicles including the vast array of English trucks. Will clamp onto Spindles from 6mm to 6.4mm (1/4"), Please check your size Spindle. Also please Note This Blade is to suit **ONLY FLAT GLASS WINDSCREENS**
$92.00
including GST 10.00 %

Wiper Motor (12 Volt) Arm and Blade Package, Adjustable length Arm and trimmable Blade. Universal Kit, Suits Many Applications

Product code: BDVTS18046
Here Is a Universal Wiper Motor- Arm & Blade set-up designed to replace many set-ups on many vehicles including the vast array of English trucks.
Also please Note This Blade is to suit **ONLY FLAT GLASS WINDSCREENS**
$244.00
including GST 10.00 %

Wiper Motor 12 Volt Universal Vintage Veteran On-Off Switch

Product code: BDVTS18044
Here Is An Electric Wiper Motor (12 volt) designed to replace many of the flogged out Lucas ones on your old Truck or car. There are cheap ones on the web but these are American designed and have a much longer Shaft to accommodate many more vehicles including the vast array of English trucks.
$164.00
including GST 10.00 %