- per page
Brake Wheel Hydraulic Cylinder Kit Rear Suits Some AT4- 114, 129 & 229 Also Rear or Front on International & Studebaker Truck. 1935-68
Product code: BDVTS18202
New Wheel Slave Cylinder Kits for rebuilding your Rear 1-1/8" leaking brakes.This is for the parts to repair One Double Piston Cylinder so if you are doing both sides of the truck (Recommended) then please purchase Two kits.
Please Click for Exactly which Series these fit.
Please Click for Exactly which Series these fit.
$48.00
including GST
10.00
%
Carburetor Kit Suit Land Rover, Morris Commercial, Commer & Dodge/ Fargo C series Trucks
Product code: BDVTS17944
A Fairly extensive kit, with a lot of parts included. Check the photos to get some idea how much and what is included.
$165.00
including GST
10.00
%
Out of stock
Click here to subscribe for 'Back-in-stock' notifications
Carter C1-BB Carburettor Rebuild Kit suits Trucks and Cars Chrysler, Dodge, Fargo, DeSoto, Plymouth.
Product code: BDVTS18239
Walker Carburettor Kits feature the most complete contents and highest quality components that meet or exceed original equipment specifications.
Please check your Carby is the Single Barrel C1 BB model it will be stamped on it. This Carby was used from 1939- 1960.
Please check your Carby is the Single Barrel C1 BB model it will be stamped on it. This Carby was used from 1939- 1960.
$106.00
save 11%
including GST
10.00
%
Clutch Master Cylinder Assembly 1-1/8" Bore Suit Dodge Australian Built AT4 & D5N incl. 100, 200, 300, 400, 500, 600 & Some & 700 Series
Product code: BDVTS18222
NEW 1-1/8" Bore Clutch Master Cylinder for DODGE AT-4 & D5-N Australian built models with 6 or V8 Engine. Suits all Series.
$429.00
including GST
10.00
%
Clutch Master Cylinder KIT Dodge Australian Built AT4 & D5N 1962-79
Product code: BDVTS18124
NEW 1-1/8" Bore Clutch MASTER CYLINDER suit DODGE AT-4 and D5-N for Australian built models, these have the unique Tri-bolt mounting so if yours is held on by three bolts then this will be the one that fits yours if listed below
$59.00
including GST
10.00
%
Clutch Plate 11-7/8" x 1-3/8' Suits Austin, BMC, Dodge, Leyland & Morris Commercial Trucks
Product code: BDVTS18280
A Quality Clutch designed for Heavy Duty applications for Trucks 2-12 Tons. It is 11-7/8" (approx. 280mm) Diameter and Shaft Diameter of 1-3/8" with 10mm thickness & 10 Splines. See Below For Exact Makes & Models
$259.00
save 10%
including GST
10.00
%
Clutch Slave Cylinder Assembly Dodge Trucks- Some A Series, AT4 & DN5 1962 onwards with 1" Bore 4 & 5 SPD. USA 100, 200,300, 400 500 Series also
Product code: BDVTS18145
New Slave Cylinder to suit Australian Dodges A series, AT4 & DN5 Trucks. Fits Most Dodges with 4 & 5 Speed Gearboxes but not the Road Ranger. It has a 1 Inch bore if yours is 3/4" this is not it. See Below for correct fitment
$145.00
including GST
10.00
%
Clutch SLAVE Cylinder KIT Dodge Australian Built AT4 & D5N 1962-79
Product code: BDVTS18125
Clutch SLAVE CYLINDER KIT suit DODGE AT-4 and D5-N for Australian built models, this will be the one that fits yours if listed below
$39.00
including GST
10.00
%
Coil Lead Boot Staight Rubber Gaiter
Product code: BDVTS17904
A quality Non resisted Straight Ignition Coil Gaiter/ Cap. Suits Petrol Engined models with 6 & 12 volt Coils with push in terminals.
$5.00
including GST
10.00
%
Contact Points Set Suit Dodge Truck Chrysler Cars Plymouth Valiant 1960-73
Product code: BDVTS18151
New Quality Contact points to get your Dodge Chrysler Vehicle running in tune. Suits 6 Cyl & V8 engines with AUTO-LITE Distributor fitted. Please Check!
$39.00
including GST
10.00
%
Contact Points Set- Suit Dodge AT4, Chrysler, Valiant, Ford, Holden, Mercedes, VW, & Volvo (Plus More)
Product code: BDVTS18093
Contact Points Set- Suit Dodge AT4, Chrysler, Valiant, Ford, Holden, Mercedes, VW, & Volvo ** See Below for all the makes & models points fit**
$39.00
including GST
10.00
%
Contact Points Set- Two Piece Suit Dodge & Fargo Trucks All 6 Cylinder 1949- 1953
Product code: BDVTS18111
Get your fuel economy back and your engine performing with New A Set Of Points with German Quality to suit Dodge Trucks Made from 1948 to 1953 with 6 cylinder engine **using the 1AT Distributor**. Check the Photo to make sure these look correct before ordering.
$38.00
including GST
10.00
%
- per page
