Home :: Morris Commercials :: Morris FE FF FK

Morris FE FF FK

Morris FE FF FK
March 1955 was the introduction of the FE Forward Control cab called the Series 3.
Four Payloads were offered, the 303FC 3 tonner, 503FC 4 tonner or 5 tonner, and the 701 a heavy duty, Engines available were the 3993cc 6 cylinder Petrol, a Diesel 3.4 litre (4 cylinder). The three, four, and 7 tonner were also available with the Morris 5.1 litre Diesel.
 

Products

Head Gasket Set VRS Austin & Morris Commercial 6 Cylinder

Product code: BDVTS18008
Here we have a Head Gasket Kit/ Set For The 4.0 litre Petrol Austin and Morris Commercial Trucks Vans & Buses. It is made here in Australia by Vintage Truck Supplies from quality material which has been proven from years of use.
$244.00
including GST 10.00 %

Headlight Bowl to Wing/ Body Rubber Gasket PAIR

Product code: BDVTS17724
A Pair of Headlight Bowl to Wing/ Body Rubber Gasket, Suits - Morris commercial
$56.00
including GST 10.00 %

Ignition Coil 12 Volt (Non-Ballasted) to suit Morris Commercials all models with Petrol Engines up to 1975

Product code: BDVTS17815
Ignition Coil 12 Volt (Non-Ballasted) to suit Morris Commercials all models with Petrol Engines up to 1975
$68.00
save 1%
including GST 10.00 %

Ignition Condenser Suit Morris Commercial Truck, Utes & Vans 1955- 1970

Product code: BDVTS17852
Ignition Condenser New to Suit ALL Morris Commercial Truck, Utes & Vans 1955-70. 4 & 6 Cylinder. **Please see below in DETAILED DESCRIPTION for proper fitment**
$29.00

Ignition Contact Points To Suit Morris Commercial Models- All 4.0 litre 6 Cylinder, 2,3,4,5, & 7 ton models

Product code: BDVTS17846
Ignition Contact Points To Suit Morris Commercial Models- 1956-63 All 4.0 litre 6 Cylinder, 2,3,4,5, & 7 ton models. For Exact Fitment please see the Detailed Description.
$38.00

Ignition Low Voltage Warning Dash Light Original style 12 volt

Product code: BDVTS18047
This is an original style Dash Warning Light which looks very original and operates exactly like yours when it was new. If your voltage drops the light comes on. It fits the original hole and wires up exactly the same so its a simple swap out (Has 12 V Bulb). See details for Models it Fits-
$158.00
including GST 10.00 %

KING PIN SET Austin BMC Morris Commercial 1949-72 3-5 Ton Series 2 Loadstar, 3 & 4 Normal & Forward Control

Product code: BDVTS18103
New Old Stock- Never Fitted, English made, Front End King Pin set for Both Sides- Suits 3 to 6 ton Austin, BMC and Morris Commercial Trucks 1949 to 1972. Does not fit every type so please check below for Detailed Fitment-
$660.00
including GST 10.00 %

King Pin Set Both Sides N.O.S. New Old Stock. Austin & Morris Commercial Trucks 1949-on Loadstar, FE, FH, FG, 3.38N more

Product code: BDVTS18120
NEW OLD STOCK King Pin kit suit Austin & Morris Commercials 2 to 6 tons. Not available anywhere! Made in Great Britain. See Below for exact models list.
$660.00
including GST 10.00 %

Lucas Starter Motor Brush Set

Product code: BDVTS17958
Here we have a new set of Lucas Starter Motor Brushes. Please See Detailed Description Below to make sure they fit your Truck, Car, & Tractor.
$39.00
including GST 10.00 %
Out of stock
Click here to subscribe for 'Back-in-stock' notifications

Manifold Gasket Austin, BMC, Leyland & Morris Commercial 4.0 Litre 6 cylinder Petrol Engine 1955 onwards

Product code: BDVTS17917
This Manifold Gasket is made for Later 4.0 Litre 6 Cylinder Austin BMC, Leyland & Morris Commercial- Trucks Buses & Vans, See DETAILED DESCRIPTION for fitment
$58.00
including GST 10.00 %

Oil Filter Element, suits Some 4.0 litre Petrol & 5.1 litre Diesel Engine

Product code: BDVTS17728
Oil Filter insert/Element to suit SOME of these models when the 4.0 litre Petrol or 5.1 litre Diesel is used, usually on 3-7 ton models.
$49.00
save 11%
including GST 10.00 %

Oil Filter Suit Trucks incl. Bedford, Austin, Ford, Leyland, Commer V8, Morris Commercial & International C-Line

Product code: BDVTS17948
A good quality Full Flow Oil Filter and seal to suit many trucks. See DETAILED DESCRIPTION FOR PROPPER FITMENT
Some swapping and changing occurred with oil filters, to be sure check dimensions in the Detailed description.
$48.00
save 9%
including GST 10.00 %