Home :: Morris Commercials :: Morris PV

Morris PV

Morris PV
Parts For The Morris Commercial PV (Parcels Delivery Van).
Morris Commercial started production in the final moments before the Second World War (1939 and early 1940) and in 1946 resumed production of PVs and they continued until 1953, which means they were the very last vehicle to use the now ill fated 2050cc Morris NPFC/3 Engine. All up there were 15,769 PVs produced. They haven't fared well over time as their birch frames and tin covered plywood body panels rotted and fell to pieces once they were retired and delegated to the back corner of the factory lot.
 

Products

Oil Filter Insert Morris Commercial LC, LC3, & PV

Product code: BDVTS17702
Oil Filter Insert Suits Morris Commercial LC, LC3, & PV with Vokes 6 Bolt housing Disposable Cartridge type.
$54.00
including GST 10.00 %

Petrol Tank Sender Gasket suit Morris Commercials

Product code: BDVTS17757
Morris Commercial fuel tank sender cork gasket suit Smiths Fuel tank sender with 6 screw/bolt holes
$7.00
including GST 10.00 %

Radiator & Engine Hose Kit Suit LC3 & PV NPFC 2050CC OHV Engine

Product code: BDVTS17882
A new Australian made replacement Radiator Hose and By-pass hose kit made specifically for the LC- LC3 Morris Commercial range of trucks & the PV van. they do not have the ribs in them as the hose is far more flexible than old hoses which were not so. We've sold many of these they fit perfectly and are well up to the job. See detailed description for exact fitment below
$73.00
save 3%
including GST 10.00 %

Radiator Isolator Rubber Support Kit for Morris Commercials & Austin 301

Product code: BDVTS18033
Here's a kit to mount your Radiator to your Chassis. it includes both isolators, and new bolts x 2, spring washers x 2 and flat washers x2. They are made from supple rubber of a shore hardness of 40 which means the softness is correct for the radiator weight and will successfully soak up the harsh vibrations from your chassis which your old hardened rubber does not, resulting in broken solder joints around your radiator. See Below for exact models these fit.
$216.00
including GST 10.00 %

Rocker Cover Seal For Most British Makes

Product code: BDVTS17983
Here we have the seal that goes on the studs that hold your Rocker/ Valve Cover Down and the Knurled or domed Nut goes on top. These fit many British vehicles.
$6.50
including GST 10.00 %

Rocker Tappet Engine Cover Gasket, Suit Morris Commercial LC LC3 LC4 & PV 15.9 H.P. Petrol Engine 2050 cc

Product code: BDVTS18015
Australian Made Engine Rocker Cover Gasket for the 15.9 H.P. Engine as used in all the Morris Commercial LC & PV vehicles from 1939-53. Quality made from a conglomerate of Cork and Neoprene pieces
$42.00
including GST 10.00 %

Side Plate Valve Chest Cover Gasket, Suit Morris Commercial LC LC3 LC4 & PV 15.9 H.P. Petrol Engine 2050cc

Product code: BDVTS18016
Australian Made Side Plate Cover Gasket for the 15.9 H.P. Engine as used in all the Morris Commercial LC & PV vehicles from 1939-53. Quality made from a conglomerate of Cork and Neoprene pieces
$39.00
including GST 10.00 %

Spark Plug Boot 90 Degree Fits All Petrol Vehicles.

Product code: BDVTS18051
Here we have a quality 90 Degree angled spark plug Lead boot. Price is for ONE so if you need multiples please adjust the quantity in your basket
$6.00
including GST 10.00 %

Spark Plug Boot cap Straight Rubber All Petrol & Kerosene Cars, Tractors & Trucks

Product code: BDVTS18038
Top Quality Spark Plug Boots made to perform. will Keep the Spark in & the Dust & Moisture out. Made for Virtually all Internal Combustion engines which have spark plugs. Can be retro fitted to very old makes and models for safety and convenience. Price is for One single Cap
$5.50
including GST 10.00 %

Spark Plug Lead Metal Clip Straight Crimp On.

Product code: BDVTS18052
Here is a Crimp On Spark Plug Lead Metal Clip Straight for Petrol powered Vehicles.
$5.50
including GST 10.00 %

Spark Plug Leads Set Suit Morris Commercial LC, LC3, LC4 & PV Trucks & Vans 1938-53 2050cc eng. With Side Entry Dist. Cap

Product code: BDVTS18076
Copper Ignition Lead Set Made for the Side Entry Distributor Cap Only. (Top Entry is a different set, see another listing). This set is made from quality copper lead & stainless & Rubber Fittings and are supplied with enough lead length ample to suit the orientation of your distributor, if a little long you can trim to suit. Includes 4 Spark Plug Leads & a 60cm Coil Lead.
$66.00
including GST 10.00 %

Spark Plug Metal End terminal Clip 90 Degrees

Product code: BDVTS18108
Here is a Spark Plug Metal End terminal Clip 90 Degrees angle. Price is for one only. If you want 4 6 or 8 please change the number to this amount at checkout.
$5.50
including GST 10.00 %